● full automatic inlay machine: lhm-3000 single station and lhm-3000d double station are optional.

● inlay four samples at the same time (double station) or inlay two samples (single station)

● human machine interface and PLC control, the system is stable and reliable.

● built in storage of 99 sets of inlay processes (saving inlay material and other parameters), and there is always one process

1. Total magnification (standard configuration): 50-500 times, 100 times objective lens (dry) is optional, and the magnification is up to 1000 times.

2. Optical system: infinite color difference correction optical system, with better image quality, higher resolution and more comfortable observation;

3. Objective lens: long working distance professional metallographic objective lens, providing go

●Adopts advanced single-chip microcomputer PLC automatic control, to achieve automatic cutting;
●Built-in 9 cutting modes. According to the soft and hard degree of sample material, the nine corresponding cutting parameters can be modified and saved.
●Automatic working state, automatic feeding and retreating, feeding and retreating speed can be set;

-The operate menu is simple and intuitive
-Closed transparent protective cover and safety switch provide protection for operators
-With weight sliding loading system, easy to operate and minimize sample damage
-Closed loop control cutting to prevent overload burning motor, circuit, etc
-Automatically stop after finishing sample cutting
-The effect is best with imported diamond

●Man-machine interface and MCU control, the system is stable and reliable.
●7 Inch Touch screen operation interface, easy to operate, easy to set parameters.
●Disc and grinding head are used stepless speed control, grinding disc can control the switching direction.
●Center loading mode，one-time fixed sample can finish grinding and polishing the sample，Thus ensuring the plane parallelism of the sam

This equipment utilizes electrochemical principles for the preparation of metallographic samples, can also be used for polishing metallographic samples, and can also be used for corrosion of metallographic samples. It has the advantages of fast sample preparation, good repeatability, and no mechanical deformation layer. It is an ideal equipment for the preparation of metallographic samples for non-ferrous metals, steel, especially stainless steel.