LHM-3000 Automatic Metallographic Hot Inlay Machine
Main features:
● full automatic inlay machine: lhm-3000 single station and lhm-3000d double station are optional.
● inlay four samples at the same time (double station) or inlay two samples (single station)
● human machine interface and PLC control, the system is stable and reliable.
● built in storage of 99 sets of inlay processes (saving inlay material and other parameters), and there is always one process to meet specific requirements.
● one click start to automatically complete the sample preparation process.
● efficient heating / cooling system to maximize heat transfer and cooling and achieve rapid circulation.
● the electro-hydraulic system can safely load pressure, and the pressure is stable and reliable.
● simple and effective top sealing mechanism, without manual assistance when ejecting samples.
● rotate the top sealing mechanism to eject automatically, reach the highest position, stop automatically, and take down the sample.
● USB interface, inlay process parameters are imported and exported through USB flash disk.
Technical parameters:
|
Specifications |
LHM-3000 |
LHM-3000D |
|
Die diameter |
Standard configuration: φ 30mm (optional) φ 25mm/ φ 40mm/ φ 50mm）Customizable: 1in / 1.25in/1.5in |
|
|
Number of mold sets (including double sample separator) |
1 set |
2 set |
|
Mosaic program |
Programmable inlay process library, which can store 99 groups of inlay processes |
|
|
Program input / output |
USB drive |
|
|
heater |
2000W |
4000W |
|
Maximum number of inlays |
two |
four |
|
Mosaic temperature range |
0 ~ 200 ℃ adjustable |
|
|
Mosaic time range |
0～30min |
|
|
Pressure range |
0-6MPa adjustable |
|
|
Total mosaic time |
6 minutes（ φ 30 samples); About 8 minutes（ φ 50 samples) |
|
|
Pressurization mode |
Automatic (electro-hydraulic system) |
|
|
Cooling mode |
Automatic water cooling (optional chiller), solenoid valve control |
|
|
Operation and display mode |
7-inch touch screen operation and display |
|
|
Maximum power |
2200W |
4200W |
|
Power |
AC220V 50HZ |
|
|
Cavity height |
135mm, effective height 60mm |
|
|
Overall dimension |
680×570×530mm |
|
|
weight |
90Kg |
100KG |
|
other |
Sample placement tray |
nothing |
Standard Attachments:
|
name |
quantity |
name |
quantity |
|
Inlay (Hm1 black) |
1 bottle (500g) |
Hose clamp (13-19) |
1 |
|
Inlay (Hm3 black) |
200g |
High temperature raw meal belt |
1 |
|
Inlet pipe |
1 |
Spoon |
1 |
|
a drain |
1 |
Hexagon socket M3 |
1 |
|
Hexagon socket M2.5 |
1 |
Hexagon socket M4 (special) |
1 |
|
Hexagon socket M5 |
1 |
Hexagon socket M8 |
1 |
|
Funnel 1.5cm |
1 |
magnetic rod |
1 |
|
Heat conducting grease |
1 |
|
|
|
Technical documents |
1. One copy of product manual 2. One copy of product certificate |
||
