LBM-2000/LBM-2000XP Intergranular Corrosion Specimen Bender

Main features:

● Bend the intergranular corrosion sample at 180 ° or 90 ° according to the national, European, American (ASTM) or ISO standards.
● Using computer control, press and shape U-shaped, L-shaped and S-shaped (optional) samples with one key; One time bending forming, without secondary pressing.
● After the sample is bent and formed, the indenter and the sample are automatically separated, and the sample is easy to take out.
● Large bending force, which can meet the requirements for bending samples with a thickness of more than 5 mm and a width of 25 mm.
● Electric loading, with three speeds, standard: 60mm/min (standard arbitration test speed); Low speed: 110mm/min; High speed: 165mm/min or the speed required by other users.
● The loading speed can be set at will, and the pressing down and rising stroke of the ram can be set at will and completed automatically (LBM-2000XP function).
● There are more than 99 bending programs, which are convenient for calling, batch and variety bending (LBM-2000XP function).
● It can be pressed once to form two samples of the same specification.
● The upper die (indenter) and lower die are made of high-strength alloy, which is wear-resistant and has a long service life.
● Up and down travel is equipped with limit device to ensure safe operation of equipment.
● The model is desktop test bench type, with aluminum alloy frame and transparent shield, beautiful and safe.
● Various safety measures to ensure safety:
● Emergency stop button
● Super impact resistance plate protection cabinet
● The equipment cannot start bending when the door is not closed properly
● Red and yellow warning lights to indicate the working status

Technical parameters:

LABTT

 Intergranular Corrosion Tester

LABTT

LABTT