LUM-3000 light curing cold inlaying machine
LUM-3000 light curing cold inlaying machine, which adopts LED, is specially used for light curing of light curing inlays.
The light curing inlay has the advantages of high speed, low viscosity, good fluidity and transparency.
After curing by this curing machine, the transparent light curing inlay fills the gap in the sample, realizing the close combination between the sample and the inlay, so that the sample can also be well protected and supported during the grinding and polishing process.
1. There are surface light sources at the top, bottom, left, right, front and back, which provide uniform illumination and high curing light power, so as to achieve uniform and rapid curing of multiple samples;
2. The light source brightness is adjustable;
3. Vacuum inlay: Before the sample is cured, the curing chamber is vacuumized to greatly reduce bubbles, and the sample and inlay are closely combined (option)
4. Manual/automatic working mode. In automatic mode, it will stop automatically according to the set time.