PVM-1S Pressure Cold Mosaic Machine

Main features:

Pvm-1s pressure cold inlay machine adopts high-strength pressure cooker and built-in air pump. It is a special metallographic inlay equipment designed for the special requirements of cold inlay.
Using this equipment, without changing the physical and chemical properties of the resin, the bubbles and pores in the embedded sample can be greatly reduced, providing the best effect for the subsequent sample grinding and polishing and microstructure analysis.

1. The built-in air compressor can quickly reach the working pressure of 0.2MPa (2 atmospheres).
2. Pressure digital display and automatic control. After reaching the set pressure value, the automatic air pump will stop automatically. After the pressure drops to a certain value, the air pump will start automatically.
3. Built in triple insurance such as pressure control, pressure relief valve and safety valve, the product is safer
- when there is pressure in the pot, the pot cover is automatically locked, that is, the pot cover cannot be opened during operation;
- when the pressure exceeds 10% of the working pressure, the safety valve on the top of the container will automatically relieve the pressure immediately.
4. The pressure vessel is made of stainless steel with large inner cavity capacity, which can process more than 20 samples with a diameter of 30mm at the same time.
5. Built in air pump, low noise, no oil, no pollution and no maintenance.
6. Special air release valve, which can implement multiple cycle pressurization and air release inlay process.

Technical parameters:

LABTT

 

 

LABTT

 

 

 

 

 

LABTT

Standard accessories：

name	quantity	name	quantity
Inlay machine main box	1set	Pressure vessel	1set
timer	1set	High pressure trachea	1set
CM4 cold mosaic resin	1set	Instruction manual and certificate	One each