LC-400XP Automatic Metallographic Cutting Machine
Metallographic Cutting Machine
Main features:
Lc400xp manual / automatic integrated metallographic cutting machine is a combination of manual mode and automatic mode
A cutting machine with a moving mode; Equipped with X-axis mobile workbench for automatic/
Manual Y-axis continuous cutting function; The device can be used in various shapes
Sample cutting of dimensions and materials. Its cutting capacity can meet the requirements of production inspection and
For routine laboratory testing of cut samples.
The user interface:
1. The main motor is driven by the frequency converter, with the speed adjustment range from 500rpm to 3000prm, and the speed is stable and will not change due to load, meeting the cutting needs of various materials. Adopt advanced single chip microcomputer PLC automatic control to realize full-automatic cutting;
2. The original vibration (feed retreat feed) cutting mode fully cools the cutting part of the sample to ensure that the cut sample will not be burned;
3. Built in 9 cutting modes. According to the soft and hard degree of the sample material, these parameters can be modified and saved for nine corresponding cutting parameters;
4. In the automatic working state, the tool is automatically fed and retracted, and the feed and retract speeds can be set;
5. It can be operated completely manually without being affected by automatic mode;
6. The filter water tank with magnetic system is adopted. When the circulating water passes through the magnetic system, the metal cutting debris generated during cutting is sucked out and discharged by the magnetic system, so as to improve the effect of sample cutting and the utilization times of circulating water, and avoid blocking the drainage system of the laboratory;
7. The fully enclosed structure and transparent protective cover are adopted to increase the observation field of vision, and the lateral sliding door mode is simple and easy without occupying space;
8. Quick clamping mechanism, easy to clamp samples;
9. The jaw, worktable and other main parts are made of stainless materials with long service life;
10. Emergency stop, air switch provides protection for the operator;
Technical Parameter
Item |
specifications |
Cutting disc |
400 * 3 * 32mm |
Spindle speed |
500-3000r/min |
Feed speed |
0.01- 3 mm/s |
Cutting stroke (Y axis) |
200mm |
Cutting stroke (X axis) |
45mm |
Cutting way |
Manual/Automatic |
Maximum cutting capacity |
Φ100mm round bar or with special fixture can be cut: long 200x wide 240x high 80mm cuboid |
Maximum length of clamping table |
120mm |
Table size |
282mm*240mm |
Cutting clamp |
Fast push-pull type, the height of the clamp mouth is 60mm |
The key control |
LCD touch screen, button |
lighting |
Dual LED lighting |
Cooling device |
Two lines of cooling water and a cooling water gun |
Magnetic filter circulating water tank |
80L |
Servo motor |
Power: 4 kw |
Emergency brake |
The abrupt stop switch |
Power supply: |
AC380V 50HZ |
Overall dimensions |
1050*800*1471mm |
weight |
300KG |
Standard accessories
Item |
Quantity |
Item |
Quantity |
|
Metallographic sample cutting machine LC-400XP |
1 |
Hose hoops 14-27 |
2 |
|
Cooling water tank + magnetic separator |
1 |
Inlet pipe Φ 19 |
1 |
|
Wrench 36 |
1 |
Steel pipe 64 mm |
60cm |
|
Wrench 22-24 |
1 |
Cutting wheel (350*2.5*32) |
2 picec |
|
Wrench 14-17 |
1 |
Cutting lubricant |
1 bot(4L) |
|
Hexagon socket 4mm (with handle) |
1 |
Hose hoops 52-76 |
1 |
|
Hexagon socket 6mm (with handle) |
1 |
Technical documents: 1 copy of product manual, 1 copy of product certificate |